SOUTH BOSTON, Va., Oct. 29, 2026 (GLOBE NEWSWIRE) — IperionX Limited (NASDAQ: IPX, ASX: IPX) (IperionX) is pleased to invite shareholders and investors to a webinar on Tuesday, November 3, 2026 at 10:00 am Australian Eastern Daylight Time / Monday, November 2, 2026 at 18:00 pm U.S. Eastern Standard Time, where Founder and CEO, Taso Arima will provide a company update.
Details of the event are as follows:
Event:
IperionX Webinar
Presenter:
Founder and CEO, Taso Arima
Time:
Tue., Nov 3, 2026 at 10:00 am AEDT / Mon., Nov 2, 2026 at 18:00 pm U.S. EST
SOUTH BOSTON, Va., Oct. 29, 2026 (GLOBE NEWSWIRE) — IperionX Limited (Nasdaq | ASX: IPX) is pleased to present its quarterly report for the period ended September 30, 2026. Highlights during and subsequent to the end of the quarter include:
Operations – Titanium powder and product manufacturing
HAMR™ Furnace Capacity Validated Above 200 tpa: HAMR™ titanium powder production continued to ramp on a 24/7 schedule, completing 1.6 tons of back-to-back deoxygenation runs in 63 hours and validated furnace capacity above the 200 tpa target annualized run-rate.
Aerospace-Grade Quality: HAMR™ powder consistently met or exceeded Grade 5 titanium quality specifications, confirming HAMR™ as a commercially proven process for primary titanium metal production.
Production & Inventory Volumes: Produced 8.7 tons of titanium HAMR™ powder during the quarter (June quarter: 1.4 tons), closing the period with 19 tons of finished titanium powder inventory and 207 tons of titanium scrap feedstock.
Near-term Commercial Programs: With titanium powder capacity validated and inventory established, downstream manufacturing and near-term commercial program execution are now the operational priorities, supported by increased customer qualification.
Titanium Fastener Manufacturing: Optimized the 300-ton, six-axis SACMI powder metallurgy press tooling and pressing parameters for a large range of titanium fastener geometries across defense and commercial applications.
Domestic Billet & Bar Products: Dedicated wet-bag cold isostatic press (CIP) production to large titanium billet and bar production for internal fastener manufacturing and as a domestic alternative to conventional titanium bar and wire mill products.
Sintering Bottleneck Relieved: Commissioned the first of two additional Elnik HSPT™ sintering furnaces, with the second furnace now installed and scheduled for commissioning in the December quarter, removing a key downstream manufacturing constraint and increasing finished titanium product output.
In-House Virginia Fastener Manufacturing: Expanded in-house finish machining and thread-rolling capabilities. Fastener production now runs largely in-house in Virginia to meet current needs, spanning uniaxial pressing, HSPT™ sintering, THRM™ heat treatment, finish machining, and thread rolling, with centerless grinding to be brought in-house under Task Order 2. Produced 1,500 fasteners with further production now scaling for U.S. Army and commercial programs.
Multi-Sector Component Development: Advanced additive manufacturing and powder-to-product programs across defense, aerospace, consumer electronics, and industrial applications, alongside advancing titanium plate and large-format titanium component manufacturing.
GenX™ continuous titanium production
Breakthrough Continuous Validation: Validated the next-generation GenX™ continuous HAMR™ production platform, processing over 500 kg of titanium powder across four continuous runs (41 hours), with 100% of valid samples meeting ASTM oxygen specifications.
Step-Change in Unit Economics: Compared to batch HAMR™ on a like-for-like run-time basis, GenX™ delivered 6x higher throughput while reducing power consumption by >75%, magnesium usage by >45%, and hydrogen consumption by >60% per kilogram of titanium powder.
100 tpa Titanium Powder Production Capacity: Validated the current GenX™ platform at an equivalent run-rate of ~100 tpa; engineering is underway to integrate the full production line and bring this incremental capacity online.
Customers and product development
U.S. Navy + Carver Pump: Completed manufacturing of all titanium components under the Carver Pump purchase order; components are now undergoing final customer testing to support commercial-scale orders for U.S. Navy pump contractors.
U.S. Army + American Rheinmetall Vehicles: Advanced manufacturing of large format titanium track pins under the U.S. Army prototype order, leveraging new Elnik HSPT™ sintering capacity to support larger follow-on production orders across U.S. Army ground combat platforms.
U.S. Army GVSC Titanium Fasteners: Secured a follow-on purchase order from the U.S. Army Ground Vehicle Systems Center (GVSC) for titanium fasteners for the Joint Light Tactical Vehicle (JLTV) and trailer. Independent test work validated that IperionX titanium fasteners exceed SAE Grade 8 steel torque-to-yield performance.
Targeting Mill Markets: U.S. titanium mill product supply remains constrained, underscored by the sectors’ record order backlog and near 20-month lead times for premium titanium products. IperionX’s CIP billet and bar program directly targets this supply gap.
Commercial Pipeline Maturation: Advanced the customer pipeline from material validation to component testing, prototype orders, and funded scale-up, targeting recurring, higher-value revenue across four core verticals:
Titanium mill products for established mill and aerospace customers;
Aerospace defense primes, with an emphasis on missile systems;
Ground and naval defense contractors, building on active U.S. Army and U.S. Navy programs; and
Spherical titanium powder for consumer goods and electronics.
Atlas-Titan Critical Minerals Development
Tier-1 Project Economics: The U.S. Government-supported Titan Definitive Feasibility Study (DFS), completed in June, demonstrated an after-tax NPV8 of US$813 million, an after-tax IRR of 39.4%, a 3.6-year payback period, and US$1.9 billion in cumulative after-tax free cash flow over an initial 14-year mine life.
Strategic Atlas Acquisition Closed: Completed the US$3 million acquisition of the adjacent Atlas critical mineral and infrastructure assets on July 1, 2026 (following the June agreement).
Immediate Infrastructure & Resource Synergies: Atlas adds ~70 acres of at-surface stockpiles, 180 acres of pre-stripped critical mineral mineralization, and established power, water, natural gas, and rail infrastructure. The full integrated Atlas-Titan economic assessment is underway.
U.S. Department of War (DoW) programs
US$18.5M Task Order 2 Award: The U.S. Army awarded Task Order 2 under IperionX’s US$99 million SBIR Phase III IDIQ contract, with an US$18.5 million base value (US$11.5 million initially funded) and scoped options bringing the total potential value to US$25.4 million.
Remaining Contract Ceiling: Task Order 2 funding for continuous HSPT™ and dehydride furnaces alongside in-house fastener finishing in Virginia. Combined awards under Task Orders 1 and 2 total ~US$19.8 million, leaving US$79.2 million available under the existing US$99 million contract ceiling.
U.S. titanium Supply Chain Funding Proposal Submitted: Submitted a formal proposal under Defense Industrial Base Consortium solicitation RPP-CM-26-02 (Domestic Processing Capabilities of Critical Minerals), which designates titanium, including titanium sponge substitutes, as a priority defense material.
1,400 tpa Expansion: Continued execution of the 1,400 tpa titanium capacity expansion under the fully obligated US$47.1 million IBAS award, the US$12.7 million DPA Title III award, and ~290 metric tons of no-cost U.S. Government titanium scrap transfers.
Corporate and liquidity
Strong Balance Sheet & Liquidity: Closed the quarter with US$63.0 million in cash (June 30, 2026: US$35.2 million), supplemented by US$33.7 million in remaining obligated, reimbursable U.S. Government funding (including US$0.5 million in incurred expenditure pending reimbursement for IBAS and another $0.3m pending reimbursement from SBIR) – providing approximately US$96.7 million in total available liquidity. Net operating cash outflow was US$12.6 million, deployed across the Virginia production ramp, product qualification, and GenX™ R&D.
US$50M U.S. Public Offering: Priced an underwritten U.S. public offering on July 7, 2026, issuing 2,275,000 ADSs at US$21.98 per ADS for gross proceeds of ~US$50.0 million (net proceeds of ~US$46.1 million).
Director On-Market Purchases: Directors acquired ~US$1.9 million of IperionX shares via on-market purchases in July, underscoring strong board alignment with shareholders.
Proposed U.S. Redomiciliation: Announced plans on August 3, 2026, to redomicile to a Texas parent company with common stock listed directly on Nasdaq (replacing the current ADS structure), subject to shareholder, court, and regulatory approvals.
Board Strengthened: Appointed Michael J. Loparco as an Independent Non-Executive Director on August 3, 2026, bringing over 25 years of global advanced manufacturing and supply-chain leadership at Jabil and Symbotic.
IperionX Validates GenX™ Continuous Titanium Production
Advancing titanium beyond batch production: GenX™ has validated continuous HAMR™ processing, advancing beyond the batch model used in conventional Kroll titanium production. Major operating gains support the potential for lower unit costs, higher titanium throughput, and a modular capital-efficient expansion pathway
Verified oxygen results: All valid product samples met the relevant oxygen benchmark: ASTM Grade 5 for angular powder and the more stringent Grade 23 specification for spherical titanium powder
Six times throughput volume: Total throughput for the GenX™ furnace was six times the volume of the batch HAMR™ system, on a like-for-like run time basis
Lower energy intensity: Power consumption reduced by more than 75% versus batch HAMR™ processing
Substantially lower measured input use: More than 45% less magnesium and over 60% less hydrogen required per kilogram of titanium powder, relative to batch HAMR™
Further efficiency potential: Operational data highlights potential for far lower capex intensity (installed capital per ton of capacity) and the potential for significantly lower labor unit costs
Next stage in Q4 2026: IperionX will continue to optimize the current GenX™ furnace; integrate the continuous furnace into a full titanium powder production line; and advance technoeconomic and engineering work for the first industrial-scale GenX™ production line
SOUTH BOSTON, Va., Sept. 16, 2026 (GLOBE NEWSWIRE) — IperionX Limited (IperionX) (NASDAQ: IPX, ASX: IPX) is pleased to announce that GenX™, its next-generation continuous HAMR™ titanium production platform, has been successfully validated through the first four production campaigns, completed on the commercial-scale GenX™ system at IperionX’s Virginia R&D facility.
GenX™ validation opens a pathway to a step change in titanium production economics. Moving beyond the batch model used in conventional Kroll titanium production, continuous processing offers the potential for higher throughput, significantly lower unit costs, improved equipment utilization and reduced processing time.
Successful testing demonstrates low-oxygen titanium powder production
The GenX™ system processed more than 500 kg of titanium powder across four separate continuous runs totaling 41 hours, at an average rate of approximately 12 kg per hour. Product from each run was collected separately, with samples randomly selected from different locations for oxygen analysis.
Measure
Angular powder
Spherical powder
Starting oxygen
0.250% – 0.323%
0.215%
Product oxygen range
0.104% – 0.144%
0.072% – 0.084%
Average product oxygen
0.126%
0.078%
Relevant oxygen specification
Grade 5: 0.200% / Grade 23: 0.130%
Runs and combined duration
2 runs / 18 hours
2 runs / 23 hours
Analyzed samples
7
8
Table 1: GenX™ continuous titanium production results
Seven of the eight angular powder samples collected met the Grade 5 oxygen limit applicable to Ti-6Al-4V plate and bar under ASTM B265 and B348. Four of the eight also met the more stringent Grade 23 oxygen limit. One sample collected during an interrupted furnace run did not complete the HAMR™ cycle and was excluded from the validation assessment. IperionX anticipates that minor process refinements will enable angular powder to meet the Grade 23 oxygen limit. All spherical titanium powder samples met the Grade 23 oxygen limit and therefore also satisfied the Grade 5 oxygen specifications.
GenX™ continuous processing – potential to materially shift the titanium cost curve
The patented HAMR™ process is IperionX’s hydrogen-enabled, low-temperature process for low-oxygen titanium powder, currently in operation on a batch basis in Virginia. GenX™ applies that process continuously, eliminating the repeated furnace heat-up, cool-down, loading and unloading time inherent in batch cycles. Measured GenX™ data has firmly established the potential to materially reduce the cost base for HAMR™ titanium production.
Operating measure
Measured GenX result
Comparison basis (batch HAMR)1
Magnesium consumption
>45% lower
Per kg
Hydrogen consumption
>60% lower
Per kg
Power consumption
>75% lower
Per kg
Processing time
6 times throughput
Like-for-like run time
1. Actual operating data based upon current batch HAMR operations
Table 2: GenX™ measured inputs and throughput compared to batch HAMR™
All comparisons are measured results against the batch HAMR™ reference; power use was measured directly on the GenX™ system. Magnesium is HAMR’s largest reagent cost, and lower use also reduces the by-product requiring downstream leaching and handling, which will be evaluated and quantified in further production campaigns.
Continuous GenX™ operation is expected to improve equipment utilization, eliminate ancillary process steps and support expansion through replicated and scaled-up production lines. Operational data highlights the potential for far lower installed capital per ton of annual capacity, and IperionX estimates significant potential labor cost savings.
Engineering the next stage
During Q4 2026, IperionX will continue to run and optimize the GenX™ furnace, integrate the current furnace into a full powder production line; and conduct technoeconomic and engineering evaluation for the first industrial-scale GenX™ production line. GenX™ remains a high capacity, low cost development platform but is not required to achieve low cost production for the existing 200 tpa production ramp or planned expansions in Virginia. Similar industrial scale furnace types in service are achieving throughputs measured in 1000s of tons per annum per unit.
GenX™ also complements continuous HSPT™ development, supporting a pathway from continuous titanium powder production to finished titanium components. U.S. Army Task Order 2, awarded on August 31, 2026 under IperionX’s US$99 million SBIR Phase III contract, funds a continuous HSPT™ development furnace and industrial-scale continuous HSPT™ and dehydrogenation capacity in Virginia.
IperionX CEO Taso Arima said:
“Achieving continuous primary titanium production has long been the ultimate aspiration for the titanium industry. IperionX’s GenX™ process is a continuous titanium production platform that is more efficient to operate and easier to scale. These first results exceeded our expectations: more than 500 kilograms of recycled titanium powder processed across four separate runs, with every sample meeting its relevant oxygen specification.
Substantially lower magnesium, hydrogen and power consumption at steady state, together with processing throughput increasing by six times, give us a strong basis for industrial development. Our next step is the engineering and economic evaluation of the first industrial-scale GenX™ production line. We aim to establish a scalable platform for expansion that lowers production costs and brings titanium within reach of a broader range of applications.”
About IperionX
IperionX is a leading American titanium metal and critical materials company – using patented metal technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions.
Our Titan critical minerals project is the largest JORC-compliant mineral resource of titanium, rare earth and zircon mineral sands in the United States.
IperionX’s titanium metal and critical minerals are essential for advanced U.S. industries including space, aerospace, defense, consumer electronics, hydrogen, automotive and additive manufacturing.
Forward Looking Statements
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans, strategies and objectives of management, anticipated production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance, and achievements to differ materially from any future results, performance, or achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and project development, including the risks of obtaining necessary licenses and permits and diminishing quantities or grades of reserves, the Company’s ability to comply with the relevant contractual terms to access the technologies, commercially scale its closed-loop titanium production processes, or protect its intellectual property rights, political and social risks, changes to the regulatory framework within which the Company operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the future. The Company does not give any assurance that the assumptions on which forward looking statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual results, performance, achievements, or events not to be as anticipated, estimated or intended, and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions or circumstances on which any such statement is based.
Contacts
Anastasios (Taso) Arima, Founder and CEO Toby Symonds, President Dominic Allen, Chief Commercial Officer
IperionX Secures Second U.S. Army Task Order to Accelerate Industrial-Scale American Titanium Production
SOUTH BOSTON, Va., Aug. 31, 2026 (GLOBE NEWSWIRE) — IperionX Limited (IperionX) (NASDAQ: IPX, ASX: IPX) IperionXLimited announces that the U.S. Army has awarded Task Order 2 under the Small Business Innovation Research (SBIR) Phase III Indefinite Delivery, Indefinite Quantity (IDIQ) contract for Low-Cost, Domestic Titanium for Defense Applications.
IperionX’s SBIR Phase III IDIQ contract enables qualifying U.S. Government agencies to place project-specific orders collectively capped at US$99 million (refer to details in the release dated June 5, 2025 “IperionX Awarded U.S. DoD SBIR Contract for up to US$99M”). Task Orders 1 and 2 have an aggregate stated value of approximately US$19.8 million, with US$79.2 million remaining available under the IDIQ contract ceiling.
Task Order W911QX26FA097 is firm-fixed-price and has a stated base value of US$18.5 million. Of this amount, US$11.5 million is currently funded and obligated. A further US$6.9 million of unexercised and unfunded options could increase the maximum potential task order value to US$25.4 million if exercised and funded at the U.S. Government’s discretion.
The SBIR funding supports equipment and manufacturing systems to expand IperionX’s domestic titanium powder-to-part manufacturing capacity. The program will increase titanium component-processing capability, bring critical manufacturing steps in-house and support shorter lead times, providing the potential to lower acquisition and production costs for U.S. defense applications.
Highlights:
Second U.S. Army task order under SBIR Phase III contract: Task Order 2 issued under IperionX’s existing US$99 million SBIR Phase III contract for Low-Cost, Domestic Titanium for Defense Applications.
US$11.5 million obligated, up to US$25.4 million potential value: Current funding fully covers three priority industrialization work packages and provides an initial allotment to a fourth. Unexercised and unfunded options could increase Task Order 2’s value to a maximum of US$25.4 million.
Industrial-scale American titanium capacity: The program advances integrated titanium powder-to-finished-component operations, with continuous HSPT™ and dehydride furnace capacity, together with equipment that will bring titanium fastener finishing fully in-house at IperionX’s Virginia facility.
Continuous titanium powder-to-part manufacturing platform: Continuous HSPT™ processing is the downstream complement to GenX™, IperionX’s next-generation continuous HAMR™ titanium production platform. Together, the technologies are designed to increase throughput and reduce unit costs from titanium powder through to finished titanium components for the U.S. defense sector.
Expanded U.S. defense manufacturing capability: Manufacturing program for titanium track pins, bolts and fasteners for defense applications, with inspection and acceptance planned at Detroit Arsenal and Army Research Laboratory’s Aberdeen Proving Ground.
Potential expansion into aerospace and refractory alloys: Future option line items could extend IperionX’s patented technologies into an aerospace-grade titanium component program with a leading global aerospace and defense supplier, C103 alloy scrap recycling for a large advanced materials company, and spherical niobium and C103 powder development with Global Advanced Metals.
CEO Commentary
“This second U.S. Army task order represents an important step in scaling IperionX’s titanium powder-to-part manufacturing platform. The SBIR Phase III award aims to advance continuous and industrial-scale HSPT™ and dehydride capacity and bring titanium fastener finishing fully in-house at our Virginia titanium manufacturing facility.
This award aligns with GenX™, our next-generation continuous HAMR™ production platform, which together will provide an integrated American titanium manufacturing system. The program will expand our capacity to manufacture titanium track pins, bolts and fasteners for the U.S. Army, shorten production lead times and strengthen the domestic titanium manufacturing capabilities required to support U.S. defense supply chains.”
IperionX Advances American Titanium Growth Strategy With Proposed U.S. Redomiciliation and Board Appointment
Highlights
Proposed U.S. redomiciliation: IperionX intends to redomicile its ultimate parent company to Texas, subject to shareholder, court, regulatory and other customary approvals, to align the Company’s legal and capital-markets structure with its integrated U.S. manufacturing, critical minerals and technology operations.
Simplified Nasdaq structure: Subject to final structuring and exchange approvals, common stock in the new U.S. parent is expected to be listed directly on Nasdaq, replacing IperionX’s existing ADS structure.
Continuity of operations and strategy: The proposed redomiciliation is not expected to change IperionX’s underlying assets, operations or strategic priorities.
Building a fully American titanium supply chain: IperionX is developing an integrated U.S. platform extending from domestic titanium minerals and recycled titanium feedstocks through low-cost titanium metal production to advanced manufactured products and components.
Board strengthened for industrial scale-up: Michael J. Loparco, an accomplished advanced-manufacturing, technology and global supply-chain executive, has been appointed as an independent non-executive director, effective August 3, 2026.
SOUTH BOSTON, Va., Aug. 03, 2026 (GLOBE NEWSWIRE) — IperionX Limited (IperionX) (NASDAQ: IPX, ASX: IPX) is pleased to announce two aligned strategic actions to support its next phase of growth as an American titanium metal and critical materials business.
IperionX intends to pursue a redomiciliation to the United States through the establishment of a Texas-incorporated ultimate parent company. The Company has also appointed Mr. Michael J. Loparco, an experienced advanced-manufacturing, industrial technology and global supply-chain executive, as an independent non-executive director, effective August 3, 2026.
Together, these initiatives are intended to align IperionX’s corporate structure, capital-markets framework and Board capabilities with the Company’s evolution into a fully integrated American titanium and critical materials company.
IperionX is developing a domestic titanium supply chain designed to extend from titanium minerals and recycled feedstocks through titanium metal production to advanced manufactured products for defense and other strategically important U.S. industries.
The Company’s U.S. operating platform comprises:
the integrated Atlas-Titan critical minerals platform in Tennessee;
titanium metal production and advanced manufacturing in Virginia; and
titanium technology research and development in Utah.
The proposed redomiciliation is reflective of the majority of IperionX’s customers, strategic relationships and government-supported programs being based in the United States.
Appointment of Mr. Michael J. Loparco as Non-Executive Director
IperionX has appointed Mr. Michael J. Loparco as an independent non-executive director, effective August 3, 2026.
Mr. Loparco is a highly accomplished executive with more than 25 years of leadership experience across advanced manufacturing, industrial technology, automation, global supply chains, corporate transactions and public-company governance.
He currently serves as Chief Executive Officer and Co-Founder of OrcaWorcs.ai, an AI-native operating platform focused on workflow orchestration and compliance across legal, financial services and industrial markets.
Mr. Loparco previously served as Chief Executive Officer of Symbotic Inc. (NASDAQ: SYM), where he led the company through its 2022 public listing.
Prior to Symbotic, Mr. Loparco spent more than two decades at Jabil Inc., one of the world’s leading manufacturing services companies. During his time at Jabil, he held a series of senior leadership roles, including Chief Executive Officer of Jabil Electronics Manufacturing Services and Executive Vice President, with responsibility for global manufacturing, supply-chain and technology operations across 25 countries.
Earlier in his career, Mr. Loparco practiced as a corporate attorney with Holland & Knight LLP. He currently serves on the Board of Sanmina Corporation (NASDAQ: SANM) and has previous board experience with established public companies and newly listed businesses. Mr. Loparco holds a Bachelor of Arts in International Business from Eckerd College and a Juris Doctor, cum laude, from Stetson University College of Law.
Mr. Loparco said:
“IperionX has assembled a leading combination of domestic resource security, proprietary titanium technology and advanced-manufacturing capability within one U.S. platform.
IperionX brings together three capabilities that are rarely found within a single U.S. company: proprietary titanium technologies, an expanding advanced-manufacturing platform and a large-scale domestic critical minerals project. That combination creates a compelling opportunity to build a more resilient, competitive and secure American titanium supply chain.
I look forward to working with the Board and management team as IperionX scales its manufacturing operations, expands commercialization and advances its position as a strategically important supplier to U.S. industry.”
IperionX Executive Chairman, Todd Hannigan, said:
“Michael is an exceptional addition to the IperionX Board. He has extensive experience leading complex manufacturing organizations, scaling advanced technology platforms, managing global supply chains and guiding public companies through periods of significant transformation.
That combination of industrial, technology, commercial and capital-markets experience is directly relevant to IperionX’s next phase as we scale our U.S. manufacturing operations, expand our product capabilities and progress from capacity development into larger-scale commercialization.”
Proposed Domiciliation to the United States
IperionX intends to pursue a redomiciliation under which a newly incorporated Texas corporation would become the ultimate parent company of the IperionX Group. The proposed redomiciliation remains subject to shareholder approval, court approval, regulatory approvals, exchange approvals and other customary conditions.
Subject to final structuring and exchange approvals, IperionX expects the common stock of the new U.S. parent company to be listed directly on Nasdaq, replacing the Company’s existing ADS structure.
The proposed redomiciliation would align IperionX’s legal domicile and capital-markets structure with its:
principal operating assets in Virginia, Tennessee and Utah;
U.S.-based workforce and management activities;
U.S. customers and strategic industrial relationships;
extensive U.S. Government-supported programs; and
strategic objective to rebuild secure American titanium and critical materials supply chains.
Against this operating and strategic background, the proposed redomiciliation is intended to complete the alignment of an American operating business with an American legal and capital-markets structure. A U.S. domicile and direct U.S. listed common-stock structure are also intended to provide a simpler and more accessible investment framework for U.S. institutional, sector-specialist and strategic investors.
The proposed structure has the potential to:
broaden IperionX’s addressable U.S. investor base;
deepen trading liquidity and price discovery;
simplify participation by strategic and sector-specialist investors; and
enhance access to larger and more diverse pools of U.S. growth capital.
The proposed redomiciliation is not expected to change IperionX’s underlying assets, operations or strategic priorities.
IperionX CEO, Taso Arima, said:
“IperionX is an American industrial company in every operational and strategic sense. Our critical mineral platform is in Tennessee, our titanium production and advanced-manufacturing operations are in Virginia, our technology research and development is in Utah, and our customers, strategic relationships and government-supported programs are located in the United States.
The proposed redomiciliation would complete that alignment at the corporate level. It would create a simpler investment structure for U.S. investors and better position IperionX to access the capital, market visibility and strategic relationships required to scale a fully American titanium supply chain.
Importantly, this proposal does not change our underlying business or strategy. It creates a corporate structure that more accurately reflects the American business we have already built and the substantially larger U.S. industrial company we intend to become.”
About IperionX
IperionX is a leading American titanium metal and critical materials company – using patented metal technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions.
Our Titan critical minerals project is the largest JORC-compliant mineral resource of titanium, rare earth and zircon minerals sands in the United States.
IperionX’s titanium metal and critical minerals are essential for advanced U.S. industries including space, aerospace, defense, consumer electronics, hydrogen, automotive and additive manufacturing.
Forward Looking Statements
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans, strategies and objectives of management, anticipated production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance, and achievements to differ materially from any future results, performance, or achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and project development, including the risks of obtaining necessary licenses and permits and diminishing quantities or grades of reserves, the Company’s ability to comply with the relevant contractual terms to access the technologies, commercially scale its closed-loop titanium production processes, or protect its intellectual property rights, political and social risks, changes to the regulatory framework within which the Company operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the future. The Company does not give any assurance that the assumptions on which forward looking statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual results, performance, achievements, or events not to be as anticipated, estimated or intended, and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions or circumstances on which any such statement is based.
Contacts
Anastasios (Taso) Arima, Founder and CEO Toby Symonds, President Dominic Allen, Chief Commercial Officer
SOUTH BOSTON, Va., July 31, 2026 (GLOBE NEWSWIRE) — IperionX Limited (NASDAQ: IPX, ASX: IPX) (IperionX) is pleased to invite shareholders and investors to a webinar on Wednesday, August 5, 2026 at 8:00 am Australian Eastern Standard Time / Tuesday, August 4, 2026 at 18:00 pm U.S. Eastern Daylight Time, where Founder and CEO, Taso Arima will provide a company update.
Details of the event are as follows:
Event:
IperionX Webinar
Presenter:
Founder and CEO, Taso Arima
Time:
Wed, Aug 5, 2026 at 8:00 am AEST / Tue, Aug 4, 2026 at 18:00 pm U.S. EDT
SOUTH BOSTON, Va., July 30, 2026 (GLOBE NEWSWIRE) — IperionX Limited (Nasdaq: IPX | ASX: IPX) is pleased to present its quarterly report for the period ended June 30, 2026. Highlights during and subsequent to the end of the quarter include:
Operations – Titanium powder production
Virginia operations continued on a 24/7 production schedule during the quarter, with HAMR™ systems in ramp-up and production focused on supporting customer qualification, engineered product programs and direct powder requirements.
HAMR™ powder production continues to consistently meet or exceed grade 5 quality parameters, and has confirmed the ability to successfully commercialize HAMR™ as a breakthrough process for the production of primary titanium metal.
Production volumes during the quarter were temporarily reduced by furnace downtime and maintenance, with operations subsequently returning to regular ramp-up cadence. The downtime did not affect the availability of titanium powder for downstream production activities.
IperionX continues to target a run-rate production capacity of approximately 200 tpa of titanium powder by the end of CY2026, subject to completion of ramp-up and operating optimization activities.
Development of GenX™, IperionX’s next-generation continuous HAMR™ platform, continued during the quarter.
Operations – Titanium product manufacturing
The advanced 300-ton, six-axis SACMI powder metallurgy press successfully completed site acceptance and commissioning in May. The press triples IperionX’s existing powder metallurgy capacity and materially expands the range, complexity and repeatability of near-net-shape titanium components that can be manufactured in Virginia.
The first of two additional HSPT™ sintering furnaces has arrived and is being installed and commissioned, with the second expected shortly; once operational, the furnaces will increase downstream capacity, throughput and production flexibility.
Product manufacturing advanced across multiple customer programs, including successful production of titanium impeller prototypes for Carver Pump, automotive components for Ford, and continued development of titanium track pins and fasteners for the U.S. Army.
Additive manufacturing and powder-to-product development continued across defense, aerospace, consumer electronics and industrial applications, including production of spherical powder samples for qualification, alongside preparation for titanium plate and large-format component programs.
Customers and product development
Independent testing by U.S. Army DEVCOM GVSC and Westmoreland Mechanical Testing & Research showed IperionX Ti-6Al-4V fasteners exceeded SAE Grade 8 steel torque-to-yield performance and achieved tensile properties above standard aerospace-grade titanium fastener benchmarks. These results validate HSPT™ and THRM™ at finished-product level and support IperionX’s lower-cost, higher-performance powder-to-product proposition.
Subsequent to quarter end, IperionX received an additional U.S. Army GVSC purchase order to manufacture prototype titanium fasteners for the Joint Light Tactical Vehicle and associated trailer.
The Carver Pump engagement progressed through the successful advancement and production of titanium impeller prototypes for customer evaluation.
Development of titanium track pins continued, including design iteration, manufacturing-process development and component production for a demanding repeat-use component application.
Customer activity during the quarter remained focused on prototype production, product development, qualification testing and low-rate initial production across defense, aerospace, automotive, consumer electronics and industrial markets.
IperionX’s customer pipeline is increasingly demonstrating a repeatable progression from material validation to component-level testing, prototype purchase orders and funded manufacturing scale-up. This broadening portfolio provides multiple pathways to convert the Virginia platform into recurring, higher-value product revenue as qualification milestones are achieved.
Atlas-Titan Critical Minerals Development
The U.S. Government-supported Titan Definitive Feasibility Study was completed in June, delivering an after-tax NPV8 of US$813 million, after-tax IRR of 39.4%, after-tax payback of 3.6 years and forecast after-tax free cash flow of US$1.9 billion over an initial 14-year mine plan.
IperionX entered into a US$3 million agreement in June to acquire critical mineral property and infrastructure assets adjacent to Titan, with the strategic Atlas acquisition completed subsequent to quarter end on July 1, 2026.
Atlas adds approximately 70 acres of at-surface critical-mineral stockpiles, approximately 180 acres of pre-stripped Lower McNairy mineralization and established power, water, natural gas and heavy-haul rail infrastructure. IperionX is advancing resource definition, metallurgy, commercial qualification and an integrated Atlas-Titan economic assessment, targeted by the end of 2026 to quantify potential capital and schedule benefits.
U.S. Department of War (DoW) programs
The U.S. Government-supported 1,400 tpa expansion pathway continued to progress under the fully obligated US$47.1 million IBAS award, alongside the earlier US$12.7 million DPA Title III award.
Strong U.S. Government support also includes approximately 290 metric tons of titanium scrap transferred at no cost and the SBIR Phase III IDIQ contracting pathway of up to US$99 million.
Corporate and liquidity
IperionX ended the quarter with US$35.2 million in cash. The quarter included continued investment in Virginia production ramp, product development and GenX™ R&D.
On July 7, 2026, IperionX priced an underwritten U.S. public offering of 2,275,000 ADSs at US$21.98 per ADS for gross proceeds of approximately US$50 million.
In addition to quarter-end cash, IperionX had US$37.1 million of remaining obligated reimbursable U.S. Government funding at June 30, 2026, including US$2.9 million of eligible U.S. Government program expenditure already incurred but not yet reimbursed. A US$2.4 million reimbursement under the DPA Title III program, which was previously forecast to be received in the June quarter, was received immediately subsequent to the quarter’s end.
As a result, IperionX’s pro-forma cash upon receipt of funds under the U.S. public offering (net of costs) and the DPA Title III program reimbursement is ~US$84 million.
Throughout March and April 2026, directors and officers acquired IperionX securities for aggregate consideration of approximately US$4.3 million. In July, directors further increased ownership through on-market purchases of IperionX securities for aggregate consideration of approximately US$1.9 million. The continued investment by directors and officers reinforces alignment with shareholders as IperionX advances its U.S. titanium and critical minerals strategy.
IperionX Announces Pricing of Public Offering of American Depositary Shares
SOUTH BOSTON, Va., July 07, 2026 (GLOBE NEWSWIRE) — IperionX Limited (“IperionX” or the “Company”) (Nasdaq:IPX; ASX:IPX) today announced the pricing of an underwritten public offering of 2,275,000 of its American Depositary Shares (“ADSs”), with each ADS representing 10 of its ordinary shares (“Public Offering”), at a price per ADS to the public of $21.98, for aggregate gross proceeds of approximately $50 million, before deducting underwriting discounts, commission and estimated offering expenses payable by the Company. The Public Offering was led by U.S. institutional investors and is expected to close on July 9, 2026, subject to customary closing conditions.
Proceeds from the Public Offering will be used to continue the commercialization and scale-up of certain of our titanium and metal alloy production technologies, including continued scale-up and expansion of the Company’s Titanium Manufacturing Campus in Virginia and associated titanium metal research and development activities, continued development of the Camden-Titan Project in Tennessee, and for general corporate purposes.
Cantor is acting as sole book-running manager for the Public Offering. Roth Capital Partners and B. Riley Securities are acting as co-managers for the Public Offering.
A shelf registration statement on Form F-3 (File No. 333-273519) was filed with the U.S. Securities and Exchange Commission (the “SEC”) on July 28, 2023 and declared effective on August 9, 2023. The Public Offering is being made only by means of a prospectus supplement and accompanying prospectus that form a part of the registration statement. A preliminary prospectus supplement and accompanying prospectus related to the Public Offering was filed with the SEC and is available on the SEC’s website at http://www.sec.gov and on the ASX’s website at http://www.asx.com.au. A final prospectus supplement related to the Public Offering will be filed with the SEC and made available on the SEC’s website at http://www.sec.gov and on the ASX’s website at http://www.asx.com.au. Copies of the final prospectus supplement, when available, and the accompanying prospectus relating to the Public Offering may be obtained from Cantor, Attention: Capital Markets, 110 East 59th Street, 6th Floor, New York, New York 10022, Email: prospectus@cantor.com.
The 22,750,000 ordinary shares that are to represent the ADSs will be issued using the Company’s placement capacity in accordance with Listing Rule 7.1.
This press release shall not constitute an offer to sell or the solicitation of an offer to buy these securities in the United States or in any other jurisdiction where such offer or sale is prohibited, and such securities may not be offered or sold in the United States absent registration or an exemption from registration under the Securities Act of 1933, as amended.
Forward-Looking Statements
This press release contains “forward-looking statements” as defined by the Private Securities Litigation Reform Act of 1995 that involve risks and uncertainties. In some cases, you can identify forward-looking statements by terms such as “anticipate”, “believe”, “expect”, “estimate”, “may”, “will”, “could”, “leading”, “intend”, “contemplate”, “shall” and similar expressions are generally intended to identify forward-looking statements. Forward-looking statements in this press release include, but are not limited to, statements with respect to the anticipated closing date of the Public Offering and the anticipated use of proceeds from the Public Offering. Forward-looking statements are subject to a variety of known and unknown risks, uncertainties and other factors which could cause actual events or results to differ from those expressed or implied by the forward-looking statements. Factors that may cause such differences include, but are not limited to: prevailing market conditions, whether or not the Company will be able to consummate the Public Offering; management’s broad discretion in the use of proceeds from any sale of ADSs; and risks related to the other matters described in the section titled “Risk Factors” in the Company’s most recent Annual Report on Form 20-F filed with the Securities and Exchange Commission.
Forward-looking statements speak only as of the date they are made. Readers are cautioned not to put undue reliance on forward-looking statements, and, except as required by law, the Company assumes no obligation and does not intend to update or revise these forward-looking statements, whether as a result of new information, future events, or otherwise.
About IperionX
IperionX aims to be a leading American titanium metal and critical materials company – using patented titanium technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions. IperionX’s award-winning patented technology portfolio enables high strength forged titanium alloy products at low cost, with class-leading sustainability and superior process energy efficiencies when compared to current industry methods such as the Kroll process. Using its technologies, IperionX has now transitioned to be a growing commercial producer of titanium metal products in the United States.
IperionX produces low-cost and high-quality angular and spherical titanium powder, which is used to produce near-net-shape and final titanium parts through powder metallurgy or additive manufacturing. These technologies provide IperionX with a sustainable competitive advantage and significant value uplift from upgrading raw titanium materials through to finished high-performance titanium products when compared to traditional titanium industry supply chains.
For further information, contact:
T: +1 980 237 8900 E: info@iperionx.com
IperionX Completes Strategic Camden Acquisition – Unlocking Ultra-High-Grade Critical Minerals to Accelerate U.S. Supply Chain
Camden surface stockpiles return exceptional grades up to 23% THM – more than 8x higher grade than the Titan Project average – positioning IperionX to accelerate strategic titanium, zircon, and heavy rare earth feedstocks to the U.S. defense and advanced technology sectors
INVESTMENT HIGHLIGHTS
Transformational asset integration & strategic scale: IperionX has successfully completed the acquisition of the Camden critical mineral, heavy rare earths, and infrastructure assets. Highly synergistic with the adjacent Titan Project in Tennessee, this acquisition materially consolidates and expands IperionX’s landholding across the Big Sandy Critical Minerals Province.
Ultra-high-grade surface stockpiles: Decades of historical high-purity silica sand operations have effectively pre-processed the heavy critical mineral fractions. This has generated approximately 70 acres of at-surface, ultra-high-grade critical mineral stockpiles, uniquely enriched in titanium, zircon, and high-value rare earth minerals.
Exceptional stockpile assay results (up to 10x uplift): Grab samples from the surface stockpiles returned outstanding Total Heavy Minerals (THM) grading up to 21.5%. Previous 1-ton bulk samples yielded 9.9% and 23.0% THM – an exceptional 5x to 10x uplift compared to Titan’s average Mineral Resource grade.
Accelerated ‘stockpile-first’ pathway: Accessing at-surface, pre-processed critical minerals provides vital ‘starter feedstocks’ with the potential to reduce capital intensity and lower mining and processing costs.
Large-scale, pre-stripped Lower McNairy advantage: Historical silica operations at Camden successfully “pre-stripped” approximately 180 acres of overburden, providing rapid, near zero-strip-ratio access to the Lower McNairy mineralization – historically proven by drilling at Titan to hold the highest grade and richest assemblage of high-value heavy rare earth, titanium and zircon minerals.
Turnkey infrastructure potentially reduces CAPEX: The acquired site provides an established industrial footprint with active grid power, water, natural gas utilities, and heavy-haul rail access. This provides the potential to significantly de-risk development timelines and reduce capital expenditure that is currently included in Titan DFS capital cost build up.
Heavy rare earths upside: Mineralization in the McNairy formation has been proven to be rich in monazite and xenotime – heavy rare earth containing critical minerals typically rich in dysprosium (Dy), terbium (Tb), and yttrium (Y) – which are vital for advanced U.S. industries.
Minerals-to-metals integration: Camden-Titan is a potential near-term supply of upstream American-sourced critical minerals, while IperionX’s downstream mineral and titanium technologies and Virginia titanium manufacturing platform provide the pathway to finished U.S. titanium metal products.
Strategic funding engagement: IperionX will engage U.S. government stakeholders, downstream processors, and strategic customers as further technical and economic data becomes available.
2026 Camden-Titan techno-economic roadmap: IperionX is now advancing an accelerated work program prioritizing sonic drilling of stockpiles, advanced metallurgical test work, infrastructure optimization, with an integrated Camden-Titan techno-economic study targeted by the end of 2026.
IperionX CEO Taso Arima said:
“The strategic importance of Camden is now clear, it gives IperionX a turnkey platform adjacent to Titan with mineral rights, ultra-high-grade stockpiles, established infrastructure and the potential to accelerate U.S.-sourced rare earth and critical mineral feedstock supply.
The most powerful feature of Camden is that the opportunity starts at surface with exceptional grades. These stockpiles have already been mined, moved and pre-processed through historical silica sand operations, creating ultra-high-grade starter feedstocks containing titanium, zircon and rare-earth-bearing minerals such as monazite and xenotime.
Camden also adds ready-access to approximately 180 acres of pre-stripped Lower McNairy mineralized areas, which could further enhance development scalability of the Camden-Titan platform. This gives IperionX the potential opportunity for a faster, lower-capital-intensity and lower opex development pathway.
The United States is investing across rare earth processing, metallization, alloying and magnet manufacturing. But downstream capacity requires secure upstream mineral feed. Camden-Titan is now positioned as a unique upstream opportunity for strategically vital titanium, zircon and rare-earth-bearing mineral products, sourced securely from the United States.
Camden does not replace Titan, it strengthens it. Together, Camden and Titan have the potential to accelerate long-term domestic supply of titanium, zircon and heavy rare earth feedstocks, crucially – dysprosium, terbium and yttrium – into markets that are central to national security, advanced manufacturing, electrification, aerospace and high-performance magnet technologies.”
SOUTH BOSTON, Va., July 02, 2026 (GLOBE NEWSWIRE) — IperionX Limited (NASDAQ: IPX, ASX: IPX) is pleased to announce the successful completion of the Camden critical mineral, property, and infrastructure assets acquisition, located adjacent to the Titan Critical Minerals Project and within the Big Sandy Critical Minerals Province in Tennessee.
Increased Scale + Accelerated Commercialization
The Camden acquisition combines four value-drivers that are rarely available together in a U.S. critical minerals development project:
Scale: Adjacent mineral sands position increases the scale of the combined Camden-Titan project.
Ultra-high-grade stockpiles: Pre-mined, pre-processed critical mineral stockpiles of approximately 70 acres at surface.
Pre-stripped mineralization: approximately 180 acres of near-zero-overburden access to the rich Lower McNairy seam.
Established, turnkey infrastructure: Ready-to-use industrial assets, utilities and rail infrastructure.
Camden’s historical silica sand operations created this opportunity. For decades, the operation was optimized to produce high-purity silica. The commercial processing circuits were not designed to recover titanium, zircon or rare-earth-bearing minerals; instead, those heavier mineral fractions were separated from the silica product stream and accumulated in surface stockpiles.
IperionX has now secured those stockpiles, along with the surrounding mineral rights, pre-stripped Lower McNairy areas and established industrial infrastructure. This converts a historical processing blind spot into a potential strategic catalyst: at-surface critical-mineral-bearing stockpiles that may be evaluated as an early high-grade starter feed for the district-scale Camden-Titan critical minerals platform.
The strategic opportunity is clear: Titan brings district-scale mineralization; Camden brings high-grade surface stockpiles, established infrastructure and a potential ultra-high-grade stockpile-first development pathway.
Two 1-ton bulk samples were collected from these pre-processed surface stockpiles in 2020 which returned exceptional grades of 9.9% and 23.0% THM, with historical drilling indicating depths of approximately 12 meters of mineral stockpiles prior to intersecting the Lower McNairy formation. Subsequent exploration grab sampling in 2025 consistently returned ultra-high-grades of ~20% THM. When compared to the Titan Project’s Resource Estimate of 431 Mt at 2.2% THM, this material represents an outstanding 5x to 10x grade uplift.
Figure 1: Illustrative example of the potential benefits attributable to high grade feedstocks in mineral extraction and processing operations.
In practical terms, higher-grade feedstock can potentially mean less material needs to be moved and processed to produce a given amount of heavy mineral concentrate. That can be important for plant size, capital intensity, operating cost and speed to first product, subject to resource definition, metallurgical recoveries, product quality and customer qualification.
This grade advantage also has a very significant impact for the in-situ proportion of the heavy rare earth bearing minerals monazite and xenotime, which are often found in very low concentrations in mineral sand deposits. The pre-concentrating and stockpiling of these minerals through historic silica operations provides the potential for rare earth values in excess of those found in commercial operations in developments around the globe. As an example, the grab samples grading at 19% or greater have an average in-situ monazite + xenotime value of approximately 1,100 ppm (along with average in-situ grades of rutile and zircon of 2.1% and 1.1% respectively).
IperionX will accelerate a drilling campaign at Camden to quantify the stockpiled material with the intent of delivering a mineral resource estimate for this material class.
Camden Pre-Stripped Advantage: Ready-access to high-grade Lower McNairy mineralization
Historical mining at Camden effectively removed the overburden (“pre-stripped”) across approximately 180 acres, directly exposing the Lower McNairy high-grade mineralized formation – known to be rich in heavy minerals, including rare earths. At the Titan Project this seam makes up about 70% of the minerals contained within the total mineral resource estimate, with grades of rutile, ilmenite and zircon approximately 2x the concentration of the Upper McNairy, and grades of rare earths approximately 10x the concentration of the Upper McNairy.
The significant amount of pre-stripping allows the potential for rapid mining development of the Lower McNairy formation without incurring significant cost of pre-stripping the overburden as well as hauling and sorting the related material.
IperionX intends to initiate a drill campaign at Camden in the coming months to quantify the material that has been pre-stripped, with the intent of delivering a mineral resource estimate for this material class.
Figure 2: Mining development areas at Camden (upper LHS) highlighting the extensive pre-stripped exposed Lower McNairy formation aligned with the regional stratigraphic column (RHS).
Figure 3: Camden acquisition in relation to the Titan Critical Minerals Project.
Turnkey Infrastructure: De-risking Capex and Timelines
The existing Camden infrastructure is highly strategic as it is an established industrial minerals processing hub with active high-voltage power, industrial-scale water, natural gas, and heavy-haul rail infrastructure. The potential to integrate Titan’s planned mineral processing into Camden’s existing infrastructure footprint provides an opportunity to reduce execution risk and capital requirements that are currently included in Titan DFS capital cost build up.
Camden-Titan: The upstream heavy rare earth feedstock platform the U.S. supply chain needs
The United States is rapidly rebuilding its rare-earth-to-magnet supply chain, with growing investment in refining, separation, metallization, alloying and magnet production. Yet one of the most important vulnerabilities remains upstream: secure domestic heavy rare earth-bearing mineral feedstock.
This is particularly important for dysprosium, terbium and yttrium – heavy rare earths that are vital for high-performance NdFeB magnets used in defense, aerospace, electric vehicles, drones, robotics and high-temperature advanced technology applications. Without reliable, uninterruptible heavy rare earth-bearing feedstocks, downstream processing and magnet capacity remains exposed to the same strategic supply-chain risk the United States is working to eliminate.
Camden-Titan is positioned to help address this upstream vulnerability by evaluating a domestic mineral sands platform that uniquely combines:
The large-scale Titan Project with rare earth and critical minerals
Secure, strategically positioned location in Tennessee, USA
Subject to resource definition, metallurgical qualification and development studies, Camden-Titan has the potential to become a strategically important U.S.-origin feedstock platform for titanium, zircon and rare-earth-bearing mineral products. Camden-Titan has the potential to underpin the long-term upstream feedstock foundation needed to support the U.S. buildout of rare earth refining, metal, alloy and magnet capacity.
Figure 4: U.S. rare earths supply chain components and associated U.S. Government funding1.
Next steps and development catalysts
IperionX is now advancing a series of techno-economic activities to define the integrated Camden-Titan commercial development pathway. Key 2026 milestones include:
Resource Definition: Sonic drilling of the 70-acre surface stockpiles and 180-acre pre-stripped zones to establish a formal JORC/S-K 1300 compliant Mineral Resource Estimate.
Metallurgy: Detailed assemblage analysis to optimize recoveries of titanium, zircon, monazite, and xenotime.
Commercial Engagement: Fast-tracked commercial qualification with downstream processors, strategic customers, and U.S. Government stakeholders.
Integrated Economic Studies: Delivery of an integrated economic assessment for the development of the Camden-Titan complex.
This announcement has been authorized for release by the CEO and Managing Director.
For further information and enquiries please contact:
IperionX is a leading American titanium metal and critical materials company – using patented metal technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions.
Our Titan critical minerals project is the largest JORC-compliant mineral resource of titanium, rare earth and zircon mineral sands in the United States.
IperionX’s titanium metal and critical minerals are essential for advanced U.S. industries including space, aerospace, defense, consumer electronics, fasteners, automotive and additive manufacturing.
Forward Looking Statements
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans, strategies and objectives of management, anticipated production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance, and achievements to differ materially from any forecast future results, performance, or achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and project development, including the risks of obtaining necessary licenses and permits and diminishing quantities or grades of mineralization, the Company’s ability to comply with the relevant contractual terms to access the technologies, commercially scale its closed-loop titanium production processes, or protect its intellectual property rights, political and social risks, changes to the regulatory framework within which the Company operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the future. The Company does not give any assurance that the assumptions on which forward looking statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual results, performance, achievements, or events not to be as anticipated, estimated or intended, and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions or circumstances on which any such statement is based.
Competent Persons Statement
The information in this announcement that relates to Exploration Results is based on, and fairly represents, information compiled and/or reviewed by Mr. Adam Karst, P.G., a Competent Person who is a Registered Member of the Society of Mining, Metallurgy and Exploration (SME) which is a Recognized Professional Organization (RPO). Mr. Karst is an employee of Karst Geo Solutions, LLC. Mr. Karst has sufficient experience which is relevant to the style and type of mineralization present at the Titan Project and Camden areas and to the activity that he is undertaking to qualify as a Competent Person as defined in the 2012 edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (the 2012 JORC Code). Mr. Karst consents to the inclusion in this report of the matters based on this information in the form and context in which it appears.
Compliance Statement
This announcement contains information relating to a Mineral Resource Estimate and an Ore Reserve Estimate for the Titan deposit (where the Mineral Resource Estimate was prepared by Mr. John Eckman, a Competent Person, and the Ore Reserve Estimate was prepared by Mr. Justin Douthat, also a Competent Person) extracted from an ASX market announcement titled “IperionX Titan DFS Confirms High-Return U.S. Rare Earths and Critical Minerals Project” and published on the ASX platform (www.asx.com.au) on 4 June 2026. The Company confirms that it is not aware of any new information or data that materially affects the information included in the original market announcement and that all material assumptions and technical parameters underpinning the estimates in the release of 4 June 2026 continue to apply and have not materially changed. The Company confirms that the form and context in which the Competent Persons’ findings are presented have not been materially modified from the original market announcement.
IperionX Awarded Up to US$6.6M by OSW-SWIB to Scale U.S. Titanium Plate for Defense Applications
Funding supports domestic production of ballistic-grade titanium plate and large-format military titanium components at IperionX’s Titanium Manufacturing Campus
IperionX awarded up to US$6.6 million by the Office of the Secretary of War – Submarine Workforce and Industrial Base program (OSW-SWIB)
The award forms part of a larger, multi-organization program to scale production of high-performance titanium alloy products, including ballistic-grade titanium plate, for land and maritime defense platforms
Funding will support expanded manufacturing capability for large-format military titanium components at IperionX’s Titanium Manufacturing Campus in Virginia, strengthening U.S. capacity for mission-critical titanium products and critical-material supply chains
IperionX will collaborate with the George H. W. Bush Combat Development Complex (BCDC) and the U.S. Army Combat Capabilities Development Command (DEVCOM) Army Research Laboratory (ARL) to accelerate product scale-up, validation, and transition pathways for defense and strategic industrial applications
Alongside the OSW-SWIB award, IperionX has received an additional purchase order from the U.S. Army Ground Vehicle Systems Center to manufacture a range of titanium fasteners for the JLTV in support of U.S. Army and Marine Corps operational requirements
SOUTH BOSTON, Va., July 01, 2026 (GLOBE NEWSWIRE) — IperionX Limited (IperionX) (NASDAQ: IPX, ASX: IPX) has been awarded up to US$6.6 million under a U.S. Department of War (DoW) program, funded by the Office of the Secretary of War Submarine Workforce and Industrial Base, or OSW-SWIB.
The award forms part of a larger program to scale domestic production of high-performance titanium alloy products, including ballistic-grade titanium plate, for maritime and land defense platforms.
The multi-organization defense program will focus on titanium mill products and components for platforms requiring exceptional strength-to-weight performance, corrosion resistance, durability, ballistic-impact tolerance, and shock survivability. These requirements represent some of the most demanding performance standards in advanced defense materials, especially for applications exposed to harsh operating environments, high-impact loads, and extended service-life demands.
Funding will support capital equipment at IperionX’s Titanium Manufacturing Campus in Virginia, expanding manufacturing capabilities for large-format titanium components and strengthening U.S. capacity for mission-critical titanium products. The program will be completed in two phases with Phase 1 granting US$0.2 million for project scoping and test work. Upon successful completion, IperionX is expected to receive a further US$6.4 million to scale manufacturing capacity and purchase capital equipment.
The program directly supports IperionX’s strategy to establish a secure, low-cost and resilient American titanium manufacturing platform for defense and advanced industrial customers.
Conventional titanium plate production is technically complex, capital- and energy-intensive, and often characterized by low yields. The process typically involves sponge production, vacuum melting and remelting, ingot or slab casting, breakdown forging, hot rolling, repeated annealing, and final surface conditioning. Each of these steps can contribute to extended lead times, elevated production costs, material yield losses, and supply-chain constraints.
IperionX’s patented titanium technologies are designed to simplify and shorten this production route. The Company’s proprietary HAMR™ process can produce low-cost titanium powder from titanium minerals or recycled titanium, while its HSPT™ and THRM™ technologies deliver high-performance, wrought-like titanium properties without reliance on the full conventional melt-remelt-forge pathway.
Together, these technologies support IperionX’s powder-to-plate titanium manufacturing platform, which is designed to reduce process steps, lower capital intensity, reduce energy intensity, improve material utilization and strengthen domestic supply-chain resilience for strategic titanium products.
Through this program, IperionX will produce and evaluate high-performance titanium alloy products for applications where titanium can provide lightweight alternatives to steel, including armor precursor plate, hatches, covers, brackets, structural components and maritime systems.
In maritime applications, titanium’s high strength, durability and corrosion resistance can support improved readiness, reduced maintenance and longer service life. Across land defense platforms, lower component weight can support improved mobility, payload capacity, fuel efficiency and survivability.
IperionX will collaborate with the George H.W. Bush Combat Development Complex, an organization within The Texas A&M University System (TAMUS), and the U.S. Army Combat Capabilities Development Command Army Research Laboratory. The collaboration is expected to support material testing, ballistic and shock-survival evaluation, product validation and transition into defense and strategic U.S. industrial applications.
The project is a systematic metallurgical study to demonstrate how THRM/HSPT microstructural engineering can be used to achieve ballistic performance. This project complements separately DoW-funded IperionX programs for powder-to-plate production. Together these DoW-funded activities provide an alternative pathway that has the potential to reduce the U.S. dependency on imported titanium sponge.
Joint Light Tactical Vehicle (JLTV) fastener prototype order
Alongside the OSW-SWIB award, IperionX has received a purchase order from the U.S. Army Ground Vehicle Systems Center to produce a range of prototype titanium fasteners for the JLTV and associated trailer – known as the “workhorse” of the Marine Corps’ ground tactical vehicle fleet – to support U.S. Army and Marine Corps operational requirements.
The JLTV is a U.S. military light tactical vehicle, originally built by Oshkosh Defense, designed to replace many Humvees by providing greater protection, mobility, payload capacity, and networked mission flexibility for combat and support operations.
While the value of the initial purchase order is not considered material, a successful prototyping program has the potential to progress into an accelerated roll-out program across a large number of ground vehicles, providing lightweight, strong and corrosion resistant titanium components for the U.S. warfighter.
IperionX Senior Adviser U.S. Army Lieutenant General Ross Coffman U.S. Army (Retired) said:
“During my time as Deputy Commanding General of Army Futures Command, I enjoyed my collaboration with BCDC, and I saw firsthand the importance of a secure U.S. low-cost titanium supply chain for national security.
The Army has a pressing need to reduce the weight of our ground vehicle platforms to maintain combat effectiveness. The benefits of titanium across all defense mobility platforms, including robotics, are well known and I’m proud to be on this mission with IperionX.”
IperionX CEO Taso Arima said:
“This award is an important validation of IperionX’s strategy to scale high-performance titanium manufacturing capacity in the United States. By combining lower-cost titanium feedstocks with our patented HAMR™, HSPT™ and THRM™ technologies, we are developing a more efficient domestic manufacturing platform for high-performance titanium plate and components.
Our objective is to shorten the conventional titanium production chain, reduce supply-chain complexity and build a more resilient, lower-cost U.S. titanium supply chain for defense, aerospace and advanced manufacturing customers.
In addition to the award, the new prototype order for titanium fasteners for the JLTV is a further signal of the important role that is developing for IperionX in supporting the U.S. defense industrial base.”
APPENDIX
Award details
IperionX has been awarded an initial $0.2 million in funding under the OSW Submarine Workforce and Industrial Base Program for project scoping and test work (Phase 1). Upon, and subject to, successful completion of Phase 1, IperionX will be awarded a further $6.4 million to scale process technology and purchase capital equipment to be installed at IperionX’s Titanium Manufacturing Campus (Phase 2). Phase1 and Phase 2 of the project are scheduled to be complete within two years.
About THRM™ and HSPT™
IperionX’s patented THRM™ and HSPT™ processes use hydrogen-enabled thermodynamics and powder-metallurgy processing to engineer wrought-like microstructures and mechanical properties in titanium alloys. These technologies reduce processing complexity and limit reliance on conventional high-cost forging and extensive thermo-mechanical work, enabling a faster and lower-cost route to advanced titanium components.
IperionX’s leading R&D team includes THRM™ and HSPT™ co-inventor Dr. James Paramore, who joined the Company after previously serving at both the U.S. Army DEVCOM ARL and BCDC.
Titanium for U.S. Defense Industrial Base
U.S. Department of War’s SWIB program reflects the strategic priority of rebuilding domestic industrial capability in critical defense materials.
Why titanium matters
Defense platforms require titanium plate, sheet and fabricated components where weight, durability, corrosion resistance and strength matter most.
In land defense systems, titanium plate supports armor precursor plate, hatches, covers, brackets and structural components where lower mass can improve mobility, payload, fuel efficiency and survivability.
In maritime defense platforms, titanium’s strength, durability and corrosion resistance can reduce maintenance, extend service life and improve readiness.
Why incumbent production is difficult
Conventional wrought titanium plate typically requires sponge production, vacuum melting and remelting, ingot or slab casting, breakdown forging, hot rolling, repeated annealing and final surface conditioning.
Titanium’s high reactivity requires tight process control, multiple high-temperature steps and large specialized equipment, driving high capital intensity, long lead times and significant energy use.
As plate thickness falls, manufacturing costs compound. Repeated rolling and annealing reduce throughput, while alpha-case removal through grinding, pickling or chemical milling lowers product yield.
IperionX’s powder-to-plate manufacturing platform
HAMR™ produces low-cost titanium powder from titanium minerals or recycled titanium, and HSPT™ + THRM™ deliver wrought-like titanium properties without the full conventional melt-remelt-forge pathway
Together, these technologies support a powder-to-plate manufacturing platform with fewer major process steps, lower capital intensity, lower energy consumption, improved material utilization and stronger domestic supply-chain resilience
About IperionX
IperionX is a leading American titanium metal and critical materials company – using patented metal technologies to produce high performance titanium alloys, from titanium minerals or scrap titanium, at lower energy, cost and carbon emissions.
Our Titan critical minerals project is the largest JORC-compliant mineral resource of titanium, rare earth and zircon minerals sands in the United States.
IperionX’s titanium metal and critical minerals are essential for advanced U.S. industries including space, aerospace, defense, consumer electronics, hydrogen, automotive and additive manufacturing.
Forward Looking Statements
Information included in this release constitutes forward-looking statements. Often, but not always, forward looking statements can generally be identified by the use of forward-looking words such as “may”, “will”, “expect”, “intend”, “plan”, “estimate”, “anticipate”, “continue”, and “guidance”, or other similar words and may include, without limitation, statements regarding plans, strategies and objectives of management, anticipated production or construction commencement dates and expected costs or production outputs.
Forward looking statements inherently involve known and unknown risks, uncertainties and other factors that may cause the Company’s actual results, performance, and achievements to differ materially from any forecast future results, performance, or achievements. Relevant factors may include, but are not limited to, changes in commodity prices, foreign exchange fluctuations and general economic conditions, increased costs and demand for production inputs, the speculative nature of exploration and project development, including the risks of obtaining necessary licenses and permits and diminishing quantities or grades of mineralization, the Company’s ability to comply with the relevant contractual terms to access the technologies, commercially scale its closed-loop titanium production processes, or protect its intellectual property rights, political and social risks, changes to the regulatory framework within which the Company operates or may in the future operate, environmental conditions including extreme weather conditions, recruitment and retention of personnel, industrial relations issues and litigation.
Forward looking statements are based on the Company and its management’s good faith assumptions relating to the financial, market, regulatory and other relevant environments that will exist and affect the Company’s business and operations in the future. The Company does not give any assurance that the assumptions on which forward looking statements are based will prove to be correct, or that the Company’s business or operations will not be affected in any material manner by these or other factors not foreseen or foreseeable by the Company or management or beyond the Company’s control.
Although the Company attempts and has attempted to identify factors that would cause actual actions, events or results to differ materially from those disclosed in forward looking statements, there may be other factors that could cause actual results, performance, achievements, or events not to be as anticipated, estimated or intended, and many events are beyond the reasonable control of the Company. Accordingly, readers are cautioned not to place undue reliance on forward looking statements. Forward looking statements in these materials speak only at the date of issue. Subject to any continuing obligations under applicable law or any relevant stock exchange listing rules, in providing this information the Company does not undertake any obligation to publicly update or revise any of the forward-looking statements or to advise of any change in events, conditions or circumstances on which any such statement is based.
Contacts
Anastasios (Taso) Arima, Founder and CEO Toby Symonds, President Dominic Allen, Chief Commercial Officer